What is SPC Plywood — Fragrant Fir Core?
SPC plywood — known in the trade as fragrant fir core board — replaces the layered veneer core with a continuous solid core of fragrant fir strips. The practical difference shows at the cut: a solid core saws to a clean, straight, splinter-free edge that layered cores cannot match, and it grips screws and staples along the whole depth instead of only at veneer lines.
That is why joineries specify it where the edge stays visible (shelving, worktops, door cores) or where a thick, stable section is needed (20 and 25 mm panels for furniture tops and structural parts). Huanawood produces it in 4×8 ft and 4×9 ft, 9–25 mm, with okoume, bintangor, pine or poplar faces.
Specifications
Standard production range. Sizes, glue types and grades outside this table can be produced to order — tell us the specification your customer requires.
| Panel size | 4×8 (1220 × 2440) · 4×9 (1220 × 2745) mm |
|---|---|
| Thickness | 9 / 12 / 15 / 18 / 20 / 25 mm |
| Core | Fragrant fir (SPC) · plywood core on request |
| Face / back | Okoume, bintangor, pine, poplar |
| Glue | MR / melamine |
| Emission | E1 |
| Edge | Solid core, straight cut, no voids |
| Moisture content | 8–12 % |
| Loading | 20GP ≈ 22 m³ · 40HQ ≈ 52 m³ |
Why buyers choose our SPC Plywood — Fragrant Fir Core
Edge quality you can leave exposed
A solid fir core cuts and routes to a clean line — no voids, no stepped veneers. Shelves and worktops look finished straight off the saw.
Full-depth fastener grip
Screws bite into solid wood along the whole penetration, not just at glue lines. Hinge cups and connector bolts hold better in 18–25 mm panels.
Naturally light scent, low resin
Fragrant fir is pleasant to machine and does not gum up tooling the way high-resin pine cores can.
Thick sections without weight penalty
Fir is lighter than eucalyptus or hardwood cores, so 25 mm panels stay manageable for one-person handling.
Applications
Door cores and frames
Solid core gives flush doors their feel and bolt holding.
Furniture tops and sides
20–25 mm thick sections with a clean visible edge.
Partition and wall panelling
Straight edges make butt joints almost invisible.
Packaging and crating
Screw-and-staple holding for reusable export crates.
Packing & container loading
| Container | Volume | Details |
|---|---|---|
| 20GP | ≈ 22 m³ | About 610 sheets of 18 mm |
| 40HQ | ≈ 52 m³ | About 1,450 sheets of 18 mm |
| Pallet | Strapped, edge-protected | Solid-core panels stacked flat |
All shipments are palletised, steel strapped and wrapped in waterproof film. Loading photographs and a full document set are sent for every container.
Frequently asked questions
What does SPC mean on a plywood board? Is it stone-plastic composite?
SPC core or plywood core — how do I choose?
Does the fir core add any scent to furniture?
Which thickness for door cores?
Can I order SPC core in 4×9 ft?
Need a price for SPC Plywood — Fragrant Fir Core?
Tell us the specification and destination port. Formal offer within 24 hours, samples available on request.
