What is MDF / HDF Board?
MDF is the substrate of modern cabinet interiors because it is the same everywhere: no grain to fight, no core voids, a machined edge that takes primer like sheet faces. Huanawood produces medium density board (720–800 kg/m³) and high density board (850–950 kg/m³) in an unusually wide size range, from 4×8 ft up to 6×12 ft for full-height wardrobe doors and wall panels.
Finish options cover the three ways cabinets are actually made: plain sanded board for your own laminating line, dyed-through board in black, green (moisture-resistant) or custom colours for exposed painted edges, and melamine-faced board for direct assembly.
Specifications
Standard production range. Sizes, glue types and grades outside this table can be produced to order — tell us the specification your customer requires.
| Sizes | 4×8 · 4×9 · 4×10 · 6×8 · 6×9 · 7×9 · 6×12 ft |
|---|---|
| Thickness | 2.5 – 30 mm (MDF) · 2.5 – 12 mm (HDF) |
| Density | MDF 720–800 kg/m³ · HDF 850–950 kg/m³ |
| Surface | Plain sanded, dyed through, melamine faced |
| Colour | Natural, black, green (MR), red, custom |
| Emission | E1 |
| Sanding | Calibrated both sides, 150–240 grit |
| Moisture content | 6–10 % |
| Loading | 20GP ≈ 22 m³ · 40HQ ≈ 52 m³ |
Why buyers choose our MDF / HDF Board
Big sheets for tall doors
6×9 and 6×12 ft sheets let wardrobe and interior-door makers cut single-piece doors above 2440 mm — the joint that MDF users most often need to avoid.
Dye that matches through the edge
Dyed-through board means a black lacquer edge stays black when it chips, instead of showing a pale core stripe.
Green MR option for wet areas
Green-dyed moisture-resistant MDF for bathroom vanity units and kitchen kick spaces — identified by colour on site, like the trade expects.
HDF where impact matters
950 kg/m³ HDF for door skins, drawer bottoms and floor underlay that resist dents.
Applications
Wardrobes and cabinet interiors
Plain or melamine MDF carcases and shelves.
Interior doors and door skins
HDF skins 2.5–6 mm over fluted or flush cores.
Painted furniture
MDF's uniform surface is the standard base for spray lacquer.
Decorative shelving
Dyed-through colour boards for retail display.
Drawer bottoms and cabinet backs
Thin 2.5–3 mm HDF and MDF.
Packing & container loading
| Container | Volume | Details |
|---|---|---|
| 20GP | ≈ 22 m³ | About 1,900 sheets of 12 mm |
| 40HQ | ≈ 52 m³ | About 4,500 sheets of 12 mm |
| Pallet | Colour/finish labelled | Dyed and plain packed on separate pallets |
All shipments are palletised, steel strapped and wrapped in waterproof film. Loading photographs and a full document set are sent for every container.
Frequently asked questions
MDF or HDF — which do I need?
Is dyed-through MDF more expensive?
Do you make E0 MDF?
What is the largest sheet size available?
Can melamine-faced MDF use my decor sample?
Need a price for MDF / HDF Board?
Tell us the specification and destination port. Formal offer within 24 hours, samples available on request.
